Hds5 gen2 and hobie questions - Kayak Fishing Adventures on Big Water’s Edge

sdsr1907 · 09-18-2015, 10:38 PM

I just purchased a new hds5 gen2 from wm, I was originally planning to do a ram transducer arm with it, but after having it in hand the xducer is too big for the mount. My question is basically how everyone has their wires routed for it thru hull. With the size of these cables I may have to drill 2 thru hull fittings from hobie.

Sent from my iPhone using Tapatalk

Dannowar · 09-19-2015, 01:21 AM

Sail mast ram ball mount with a hole drilled next to it. Only needs to be big enough to get the transducer cable through. The power cable can slip right in then install whatever plug you're going to use

sdsr1907 · 09-19-2015, 07:08 AM

Going to use a geartrac and ram mount. Think I worked the wire plug in a way that it'll all fit thanks

Sent from my iPhone using Tapatalk

09-18-2015, 10:38 PM	#1
sdsr1907 Member Join Date: Jan 2015 Posts: 71	Hds5 gen2 and hobie questions I just purchased a new hds5 gen2 from wm, I was originally planning to do a ram transducer arm with it, but after having it in hand the xducer is too big for the mount. My question is basically how everyone has their wires routed for it thru hull. With the size of these cables I may have to drill 2 thru hull fittings from hobie. Sent from my iPhone using Tapatalk

09-19-2015, 01:21 AM	#2
Dannowar Senior Member Join Date: Aug 2012 Posts: 1,823	Sail mast ram ball mount with a hole drilled next to it. Only needs to be big enough to get the transducer cable through. The power cable can slip right in then install whatever plug you're going to use __________________ "Beware the lollipop of mediocrity; lick it once and you’ll suck forever." — Brian Wilson

09-19-2015, 07:08 AM	#3
sdsr1907 Member Join Date: Jan 2015 Posts: 71	Going to use a geartrac and ram mount. Think I worked the wire plug in a way that it'll all fit thanks Sent from my iPhone using Tapatalk