Fishfinder will not "shoot" through hull

[salty pirate]

Originally Posted by BigDog216

Nope! no water in the hull....excuse my stupidity.....didn't find this forum til after I went fishing....gonna use the Goop method....thanks

be careful with the goop method if you get air bubbles in the goop you won't get a good pic. I saw someone posted transducer in a ziplock bag that has water in it. that might be a good way to test how shoot through hull works on your ff.
if temp is importent to you shoot through is not the way to go.

[mtnbykr2]

I have used the goop method 4 different times with no trouble, I like the
zip lock method too...

[sandydiego]

[QUOTE=
if temp is importent to you shoot through is not the way to go.[/QUOTE]

My FF temp is spot on with the wet mount. I'm sure it depends on how much water/contact the wet mount has.

[maui jim]

That will $145.00 for the BWE Information fee....
Tax is included of course...

We accept beer, fish in trade and always cash...

[mtnbykr2]

:luxh ello:

[salty pirate]

Originally Posted by sandydiego

My FF temp is spot on with the wet mount. I'm sure it depends on how much water/contact the wet mount has.

Your right the temp of the water that's inside the 5" pvc inside the hull of the kayak couldn't dif-fer from that of the surface temp.

[sandydiego]

Originally Posted by salty pirate

Your right the temp of the water that's inside the 5" pvc inside the hull of the kayak couldn't dif-fer from that of the surface temp.

The heat loss through the polyethylene hull is why it works. The PVC and cap just keep the water in place. We have compared it to a in the water mount and it read the same.

[tagyak]

http://www.bigwatersedge.com/bwevb/s...?t=6394&page=5
take a look at this link. this is what i did for my wet mount. i used a container that i had bought lunch meat in from target and just cut out the bottom.
this has worked great for me. it holds the water tight with the lid and also the temp reading has been fairly accurate.
make sure to use a piece of foam to keep the transponder in place in the container. if you don't the transponder moves around and the reading will be off. i made this mistake so learn from me.

[sandydiego]

Originally Posted by tagyak

http://www.bigwatersedge.com/bwevb/s...?t=6394&page=5
take a look at this link. this is what i did for my wet mount. i used a container that i had bought lunch meat in from target and just cut out the bottom.
this has worked great for me. it holds the water tight with the lid and also the temp reading has been fairly accurate.
make sure to use a piece of foam to keep the transponder in place in the container. if you don't the transponder moves around and the reading will be off. i made this mistake so learn from me.

Snap lock containers work great as well and you can screw the unit into the lid to hold it in place.

[Hunters Pa]

If you are really brave you could take this approach

http://www.kayaksportfishing.com/php...pic.php?t=8407