![]() |
|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Community | Calendar | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
Join Date: Jun 2008
Posts: 552
|
I doubt this is your problem, but if you need to crack it open, you might want to read this post from Bing:
http://kayaksportfishing.com/phpBB2/...ghlight=#53764 Just copy and paste the link to your browser. |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Mar 2005
Location: Santa Barbara
Posts: 124
|
thanks for the replies. I have two batteries, both have worked fine with the finder in the past. Both are charged and work great with the bilge pump so it seems the batteries are not the problem.
the power cable is new, connections new, no nicks or cuts. i think its just broke. ![]()
__________________
![]() Do not dwell in the past, do not dream of the future, concentrate the mind on the present moment -Buddha |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Jun 2010
Location: Under a bridge
Posts: 2,169
|
Had the same problem, went back to the store and they guy and I figured it was my inline fuse housing. Sometimes it connected, sometimes it was not. Good luck.
|
![]() |
![]() |
![]() |
#4 |
PROBATION
Join Date: Jul 2005
Posts: 657
|
check the head unit holes & pins for corrosion. Make sure the connection is stupid clean.
*I use MAF / electronic cleaner & small fine wire brushes to clean up my junk when it stops wokring. ![]() I have/ had a love-hate relationship with two Matrix 17... You may want to save the $85 head unit replacement for the Matrix and get a different unit all together. ![]() $.02 If you were closer I would loan you my head unit to test your connection. Someone local might be able to help? |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2008
Location: La Jolla
Posts: 189
|
H-Birds are indeed hyper sensitive to corrosion of the contact points of the plugs.
Most everyone here is right, this corrosion will cause a flux in voltage, and the unit will misbehave. indeed, the fuse in the power wire is a bit finicky as well. Sometimes on sometimes off. Try cleaning the connectors super well, then using dielectric grease around them to discourage future corrosion. Good luck. Willy |
![]() |
![]() |
![]() |
|
|