Safety neutral switch

[MITCHELL]

But engine would not turn over after cleaning already clean battery posts and trying to jump with another battery 1to 2hrs later i figured out that was not the problem and my battery was brand new.
So I Google search my trucks problem and found out about the safety neutral switch.thinking it was that or from the battery to the starter. I found a Google open form.talking about the safety neutral switch and to put truck in neutral wiggle automatic transmission shift handle and i got it started so everything is working right now after buying a new switch for $60 the form said it might be going bad and to I may have slack in my shift cable and you can ajust switch truck is not suppose to start in gear if it does switch is out of adjustment or bad I still going to check all connections got truck running but not 100 percent sure what it is I will let you no what I find

[alanw]

Clicking at the starter solenoid is usually because of low current at the solenoid. If the battery is good and the solenoid is good then it's a switch going bad somewhere down the line. Check the ignition switch, neutral/park switch, starter relay, or maybe bad wiring somewhere. You can apply power directly from the battery to the solenoid as a test to eliminate both of them as the problem but be careful the car is in park with the e-brakes on or your car might be driving without you