![]() |
|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Community | Calendar | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
Join Date: Mar 2012
Location: San Diego, CA
Posts: 555
|
Ok. So to answer the questions, I don't know what size the pump is. I bought the unit all set up at OEX. So what you are saying is my 12v battery that I am using for both my FF and my bait tank is too much. I keep hearing that. So best case, the bait tank needs its own battery. What is an aerator head and where does it go? What is a pvc ball valve and where would it go? The out take hole and hose is about 3/4 of the way to the top of the bucket.
I guess you guys can tell. I am not too mechanically inclined...
__________________
Fishtales |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jan 2013
Location: Otay
Posts: 704
|
GOOGLE what a PVC ball valve is. Im currently setting up my own livewell and Im using a 12V motorcycle battery (since I have some laying around) running a simple tsunami 500 gph (Gallon Per Hour) and plan on using the same power source for my FF. A 500 GPH pump is like that water fountain at school that always squirts you in the face and out of that fountain but not much more than that. Your outlet 3/4 the way up is fine. if you mount a PVC ball valve (google) or the friendly plumbing dept. at Lowes can show you.... mounted inline between your pump and bucket sounds like a $0.60 solution.
Good Luck!!!! ![]() Jay |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Jun 2011
Location: Too far from the launch.
Posts: 443
|
Aerator Head
![]() Ball valve
__________________
![]() |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Mar 2012
Location: San Diego, CA
Posts: 555
|
Ok. It's making sense now. You guys are awesome!
Janine ![]()
__________________
Fishtales |
![]() |
![]() |
![]() |
|
|