Share Your Innovations - Kayak Fishing Adventures on Big Water’s Edge

10-07-2012, 03:31 PM

Made a small modification to the nets to better accommodate the pucks.

One came loose last night so I wanted to come up with a better way to secure them. This is what I came up with.

I cut the string that holds the tag ends of the netting together which forms the opening. Then I weaved a short bungee in the loops and zip tied them to the lower ring. I cut the end off so they wouldn't rust and get hung up, then burned the tips to clean them up.

The bungees cost $2.94 from home depot.

Took about 2 minutes for each hoop.

10-07-2012, 03:31 PM	#11
Drake Guest Posts: n/a	Made a small modification to the nets to better accommodate the pucks. One came loose last night so I wanted to come up with a better way to secure them. This is what I came up with. I cut the string that holds the tag ends of the netting together which forms the opening. Then I weaved a short bungee in the loops and zip tied them to the lower ring. I cut the end off so they wouldn't rust and get hung up, then burned the tips to clean them up. The bungees cost $2.94 from home depot. Took about 2 minutes for each hoop.