Share Your Innovations - Kayak Fishing Adventures on Big Water’s Edge

Iceman · 01-25-2010, 04:13 PM

water pick up thru tank scupper. This is a similar variation of the Hobie tank set up.

cut down a 90 male 1" thread to 3/4 hose elbow so it fits in the channel flush, the screw splits the opening in half to keep debri out.

Easily changed out to most kayaks.....skanky after rain bay water

Simple way of getting that thru hull set up with out drilling those big holes. A little forward momentum is all it takes to prime/ 6 volt kept prime and worked well.

01-25-2010, 04:13 PM	#1
Iceman Administrator Join Date: Mar 2005 Location: 1-2 miles off the point Posts: 6,943	water pick up thru tank scupper. This is a similar variation of the Hobie tank set up. cut down a 90 male 1" thread to 3/4 hose elbow so it fits in the channel flush, the screw splits the opening in half to keep debri out. Easily changed out to most kayaks.....skanky after rain bay water Simple way of getting that thru hull set up with out drilling those big holes. A little forward momentum is all it takes to prime/ 6 volt kept prime and worked well. __________________