2 questions- Fasteners and Sonar Wiring - Kayak Fishing Adventures on Big Water’s Edge

ProfessorLongArms · 10-23-2017, 02:19 PM

Just wanted to follow-up and say thanks for the advice.

*finally* got the wiring fixed. I'll never launch again without doing a quick test with my Voltmeter on the wiring harness.

I actually had 4 different points of failure to fix before I could power it back on (battery terminal connectors not tight enough, battery box connector corroded, fuse box completely corroded, and unit plug corroded). took a surprising amount of WD40 and friction to get it all back up and running.

I recommend, as I did, going ahead and getting a dedicated voltmeter, a pack of crimp connectors, and some extra cable ties to keep in a kit with the kayak.

10-23-2017, 02:19 PM	#4
ProfessorLongArms Senior Member Join Date: Sep 2017 Location: Los Angeles, CA Posts: 400	Thanks! Just wanted to follow-up and say thanks for the advice. finally got the wiring fixed. I'll never launch again without doing a quick test with my Voltmeter on the wiring harness. I actually had 4 different points of failure to fix before I could power it back on (battery terminal connectors not tight enough, battery box connector corroded, fuse box completely corroded, and unit plug corroded). took a surprising amount of WD40 and friction to get it all back up and running. I recommend, as I did, going ahead and getting a dedicated voltmeter, a pack of crimp connectors, and some extra cable ties to keep in a kit with the kayak.