Kayak Fishing Adventures on Big Water’s Edge  

Go Back   Kayak Fishing Adventures on Big Water’s Edge > Kayak Fishing Forum - Message Board > General Kayak Fishing Discussion
Home Forum Online Store Information LJ Webcam Gallery Register FAQ Community Calendar Today's Posts Search

Reply
 
Thread Tools Display Modes
Old 08-06-2013, 06:46 PM   #1
janines.fishtales@cox.net
Senior Member
 
janines.fishtales@cox.net's Avatar
 
Join Date: Mar 2012
Location: San Diego, CA
Posts: 555
Low battery reading

Hey all,

The last two times I went fishing, I noticed I was getting a "low battery" reading on my fish finder. The battery was fully charged before fishing. I have a 12v battery that I use both for the FF and for my bait tank. Fully charged it is more than ample to keep both powered for the day. Any ideas as to why I am getting the reading. In all honesty, it looks like one of the battery connections is loosening up a bit and may need to be re-attached. Any suggestions?

Janine
__________________
Fishtales
janines.fishtales@cox.net is offline   Reply With Quote
Old 08-06-2013, 06:58 PM   #2
jruiz
Large Member
 
Join Date: Jul 2012
Location: La Verne, CA
Posts: 1,002
I don't know which ff you have but most have the ability to display the voltage on your screen by enabling it in your settings. Knowing that will be helpful. In addition many alarms are manually adjustable. So yours might be set too low. For instance it could be set to 11.8 to trigger an alarm. What your ff looks at when reading a voltage is the 12v relative to the common. If let's say there was a salt bridge between those two it could pull the two voltages close together leading to a low voltage alarm. I could go on and on but start there and let us know what you find.
jruiz is offline   Reply With Quote
Old 08-06-2013, 07:01 PM   #3
ctfphoto
Senior Member
 
ctfphoto's Avatar
 
Join Date: Sep 2011
Location: San Diego
Posts: 901
My charger recently went bad and had to be replaced, one thing you may want to check.
ctfphoto is offline   Reply With Quote
Old 08-06-2013, 07:29 PM   #4
echo1er
Senior Member
 
echo1er's Avatar
 
Join Date: Sep 2011
Posts: 598
Same with me I went to charge my battery with a wall charger and didnt charge so I use a quick charger and it work fine.

Do you discharge your battery after used? It can set a memory for the cells keeping it low.
echo1er is offline   Reply With Quote
Old 08-06-2013, 09:19 PM   #5
alanw
Made in U.S.A.
 
alanw's Avatar
 
Join Date: Oct 2012
Location: Dana Point
Posts: 1,625
lead acid batteries don't have a memory
__________________
Hobie PA 14 ¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º>
Jackson Kraken ¸.·´¯`·.¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º>
Malibu X-Factor ¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º>
Malibu Stealth-12 ¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º>


Its not a spelling B its a fishing B ~yakjoe
alanw is offline   Reply With Quote
Old 08-06-2013, 10:43 PM   #6
Hobie-Pedaller
Fish On !!!
 
Hobie-Pedaller's Avatar
 
Join Date: Dec 2006
Location: San Diego, CA
Posts: 194
it could be.... failing battery, failing charger, bad electrical connections, OR maybe even failing FF head unit/power wiring....

use a voltmeter to test output voltage of battery, BEFORE, DURING & AFTER charging.

when 12 V DC charger is plugged in to 120 VAC wall outlet, it's "output" should be around 13-15 volts DC, or so (higher than 12 V). if it is not, then your charger is going bad.

if the charger is OK, then see if your battery will recharge to 12-13 volts, and hold that charge for many hours, after disconnecting charger. if it will not, your battery is going bad.

if battery & charger are both fine, then you may have bad wiring connections from battery to FF, OR your FF head unit and/or its power wiring may be going bad.


PS - i just went thru similar issues last month, that my battery would not adequately power FF. after testing various voltages as described above, i determined my battery was failing, and would not hold a charge above around 10 V. even though my charger output was close to 15 V, and i would leave charger connected to battery over night.


Quote:
Originally Posted by jruiz View Post

I don't know which ff you have but most have the ability to display the voltage on your screen by enabling it in your settings. Knowing that will be helpful....
i agree, this can be VERY helpful, to know what voltage is actually getting to the FF head unit.

PS2 - about 5 years ago, my first FF was failing. the FF's factory provided power wiring became so corroded, that even when i had a fully charged 12 V battery connected to FF power cable, only about 10-11 volts were actually getting to the FF head unit.
i had to replace the FF's factory made power/tranducer cable, and FF head unit was still OK.
.
__________________
Hobie Kayaks: Use Your Legs to Pedal.... Use Your Arms to Fish !!



Kayak Fishing is a DRUG.... and I'm addicted !!

Last edited by Hobie-Pedaller; 08-06-2013 at 10:55 PM.
Hobie-Pedaller is offline   Reply With Quote
Old 08-07-2013, 08:31 AM   #7
janines.fishtales@cox.net
Senior Member
 
janines.fishtales@cox.net's Avatar
 
Join Date: Mar 2012
Location: San Diego, CA
Posts: 555
Ok. Thank you for all the suggestions. I will look into all this. I have been wanting to replace that battery anyway. It is too heavy. I am thinking of buying the already put together "kibble" bait tank OEX sells. It has its own battery. My bait tank is the 5 gal bucket system, which works ok, but it's too top heavy. So I'm guessing I have to get another battery for my FF, right? What do you guys think of the OEX bait tank?

Janine
__________________
Fishtales
janines.fishtales@cox.net is offline   Reply With Quote
Old 08-07-2013, 09:19 AM   #8
ctfphoto
Senior Member
 
ctfphoto's Avatar
 
Join Date: Sep 2011
Location: San Diego
Posts: 901
I bought the OEX bait tank and it works great.

It has enabled me to catch Halibut, WSB and Yellowtail.
ctfphoto is offline   Reply With Quote
Old 08-07-2013, 10:00 AM   #9
jruiz
Large Member
 
Join Date: Jul 2012
Location: La Verne, CA
Posts: 1,002
Ya you could throw money at it and the problem might go away. Or you might find yourself in a situation where you spent all this money and the problem is still there. I think it would be very beneficial for you to troubleshoot and fix regardless of which route you take.
jruiz is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 08:51 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.