Scotty Transducer Mount

[Iceman]

Pretty cool option $25.49

[FreddoFly]

Originally Posted by Iceman

Pretty cool option $25.49

Hi - Have you been out with it? My Garmin transducer is not to small and I'm currently looking for how I'm going to mount it. I'm looking at RAM Mounts and Railblaza's too...

Hope this works well for you!

[Amish Ed]

Originally Posted by FreddoFly

Hi - Have you been out with it? My Garmin transducer is not to small and I'm currently looking for how I'm going to mount it. I'm looking at RAM Mounts and Railblaza's too...

Hope this works well for you!

Don't forget Mad Frog Gear What kind of yak do you have?

[FreddoFly]

Hi Ed,

I purchased an Ocean Kayak Tetra 10 (not the angler model though) to save $$ up front and rig it my way. I picked up a Garmin 53cv and need to figure out how I'm deploying the thing. I'm leaning more and more toward an "in the water" (i.e., over the side) transducer solution and mounting the FF on the battery box which will be strapped onto the console. This will make the unit more portable too! I'm on the east coast and don't ocean fish. Lake and ponds mainly.

[goldenglory18]

Hey Ed, have you mounted a FF to your Ride yet?

I picked up the last Midnight 135 that Andy had, and now I'm playing with ideas for the transducer. The way I had mine mounted on previous Ride's (keel mount) wont work this time as I'm going to put a rudder on this one.

[Harry Hill]

Originally Posted by goldenglory18

Hey Ed, have you mounted a FF to your Ride yet?

I picked up the last Midnight 135 that Andy had, and now I'm playing with ideas for the transducer. The way I had mine mounted on previous Ride's (keel mount) wont work this time as I'm going to put a rudder on this one.

I made a mount for the stern of my P2T that s.
wings up out of the way if it hits anything or when I'm launching out of copper pipe. It works pretty good but I haven't been in heavy kelp yet to see if it hangs up. So far it hasn't been a debris catcher. I would post a picture but for some reason my new computer won't accept bluetooth files from my phone.

[YakHanded]

Originally Posted by goldenglory18

Hey Ed, have you mounted a FF to your Ride yet?

I picked up the last Midnight 135 that Andy had, and now I'm playing with ideas for the transducer. The way I had mine mounted on previous Ride's (keel mount) wont work this time as I'm going to put a rudder on this one.

Not sure if this will help much but I have used the RAM version of this scotty transducer mount on my OK prowler for years.

IMO this one looks better, it stays tighter to the hull and will create less drag when paddling. The RAM trans arm definitely collects debris that I have to clear every so often, but it does fold up and is easy to get at.

I mounted mine just in front of the foot pegs, which makes it an easy connection to the actual FF head unit. Also easy to remove everything and store for transport.

Also nice to be able to turn off sonar and get transducer out of the way when launching/landing in the surf.

I always got better returns from the transducer directly in the water than through the hull so any hassle it causes was always worth it to me....

my 2 cents!

[FreddoFly]

Originally Posted by YakHanded

Not sure if this will help much but.... my 2 cents!

Thanks for this post. I'm looking for what "works" / "worked". You post told me what I wanted to hear. Portability, the transducer can be lifted out easily, and what I find I'm hearing a lot is it's always better is having the transducer "in" the water. Mine reads water temps and I want that accuracy.

Being new to kayak fishing I splurged on my FF but I was able to afford it and plan on using it a lot. I hate being on a lake and "wondering" if I'm over/near fish or not. I'll even be able to chart depths/drop offs, structure, etc. which can only be a plus.

There are many side mounting options available so I'll keep looking and reading what experienced guys have to offer. Thanks!!

[Amish Ed]

Originally Posted by goldenglory18

Hey Ed, have you mounted a FF to your Ride yet?

I picked up the last Midnight 135 that Andy had, and now I'm playing with ideas for the transducer. The way I had mine mounted on previous Ride's (keel mount) wont work this time as I'm going to put a rudder on this one.

Yes, I'm using a MFG Micro Liberator w/TDA for the Transducer. On the Trident I had it mounted to a Yakattack gear track, so it fits the Ride no problem. My back is jacked up at the moment, I'll try to take pictures tomorrow.

What happened with the Thresher?

Freddofly, transducer in the water is definitely the way to go. Sounds like you have the FF/battery mounting decided, you just need to decide on the transducer mount. I would venture to say that the space needed for the mount will determine which one you choose.

[FreddoFly]

Originally Posted by Amish Ed

Freddofly, transducer in the water is definitely the way to go. Sounds like you have the FF/battery mounting decided, you just need to decide on the transducer mount. I would venture to say that the space needed for the mount will determine which one you choose.

Thanks Ed... I'm not 100% of the FF/battery but leaning that way (portability!).

For the transducer, it's about 6" long and I need a tough mount (I imagine)...

[goldenglory18]

Originally Posted by Amish Ed

Yes, I'm using a MFG Micro Liberator w/TDA for the Transducer. On the Trident I had it mounted to a Yakattack gear track, so it fits the Ride no problem...What happened with the Thresher?

Good call. I totally forgot about that company.

Thresher had a twisted hull. No one is really sure how/why it happened, but of course Andy took care of me and got me into the Ride instead. I liked the Thresher, but I LOVE the Ride (and I better considering it's my fourth Ride I've owned now.... LOL)