Boat mechanic? - Kayak Fishing Adventures on Big Water’s Edge

Chops6531 · 03-08-2014, 12:11 PM

Anyone know of a good boat engine mechanic ?

Fiskadoro · 03-08-2014, 12:15 PM

Quote:

Originally Posted by Chops6531

Anyone know of a good boat engine mechanic ?

What kind of engine?

Chops6531 · 03-08-2014, 02:42 PM

1998 Johnson 130 hp, two stroke

jorluivil · 03-08-2014, 04:18 PM

I had a 1996 200HP 2 stroke..........what's wrong with it?

Chops6531 · 03-08-2014, 05:15 PM

It starts up fine but it won't go into gear. Forward or reverse doesn't work.

jorluivil · 03-08-2014, 05:35 PM

The best way to find out if the cable is busted it to remove the cowling, push forward on the throttle and see if it engages the shaft that tells the engine to go forward or reserve(circled in red). If I remember correctly once the shaft engages the engine another cable will take over and control the speed.

jorluivil · 03-08-2014, 05:50 PM

I changed those cables on my engine once, it took a few hours to do it but it was because I took my time and was doing it solo. Another thing to check is the shaft that the forward/reverse cable controls, its hard to see it because of the parts that cover it but they are known to go bad. Basically, the way is works is the cable is connected to a plate, that plate is welded onto a shaft and that shaft goes into the engine and when it moves forward or back it engages the engine. Apparently, the weld that holds the plate to the shaft is known to fail after a while because of the pressure that it put on it.

I forgot to ask earlier, but are you able to rev the engine if you push forward or back on the throttle? If its revs but does not engage its safe to say its the cable or the shaft.

BigTunaL · 03-08-2014, 07:50 PM

My friend's husband is an honest and good boat mechanic. If you like I can send you his number tomorrow.

Sent from my iPhone using Tapatalk

Chops6531 · 03-09-2014, 09:46 AM

This is great. I didn't think I would get this great of a response. Awesome! I have taken the cover off and there's been a neighbor and a man at the boat wash station that have taught me a couple of thing. I took out the drew at the bottom of the prop assembly and the magnet has metal clippings. I'm definitely gonna take ur advice on this. BWE is great!!

03-08-2014, 12:11 PM	#1
Chops6531 Senior Member Join Date: May 2013 Location: San Diego Posts: 112	Boat mechanic? Anyone know of a good boat engine mechanic ? __________________ -Chops

03-08-2014, 02:42 PM	#3
Chops6531 Senior Member Join Date: May 2013 Location: San Diego Posts: 112	1998 Johnson 130 hp, two stroke __________________ -Chops

03-08-2014, 04:18 PM	#4
jorluivil Senior Member Join Date: Apr 2010 Posts: 6,855	I had a 1996 200HP 2 stroke..........what's wrong with it? __________________ www.facebook.com/Teamsewer

03-08-2014, 05:15 PM	#5
Chops6531 Senior Member Join Date: May 2013 Location: San Diego Posts: 112	It starts up fine but it won't go into gear. Forward or reverse doesn't work. __________________ -Chops

03-08-2014, 05:35 PM	#6
jorluivil Senior Member Join Date: Apr 2010 Posts: 6,855	The best way to find out if the cable is busted it to remove the cowling, push forward on the throttle and see if it engages the shaft that tells the engine to go forward or reserve(circled in red). If I remember correctly once the shaft engages the engine another cable will take over and control the speed. __________________ www.facebook.com/Teamsewer

03-08-2014, 05:50 PM	#7
jorluivil Senior Member Join Date: Apr 2010 Posts: 6,855	I changed those cables on my engine once, it took a few hours to do it but it was because I took my time and was doing it solo. Another thing to check is the shaft that the forward/reverse cable controls, its hard to see it because of the parts that cover it but they are known to go bad. Basically, the way is works is the cable is connected to a plate, that plate is welded onto a shaft and that shaft goes into the engine and when it moves forward or back it engages the engine. Apparently, the weld that holds the plate to the shaft is known to fail after a while because of the pressure that it put on it. I forgot to ask earlier, but are you able to rev the engine if you push forward or back on the throttle? If its revs but does not engage its safe to say its the cable or the shaft. __________________ www.facebook.com/Teamsewer Last edited by jorluivil; 03-08-2014 at 07:57 PM.

03-08-2014, 07:50 PM	#8
BigTunaL Senior Member Join Date: Feb 2014 Location: Carlsbad Posts: 170	My friend's husband is an honest and good boat mechanic. If you like I can send you his number tomorrow. Sent from my iPhone using Tapatalk __________________

03-09-2014, 09:46 AM	#9
Chops6531 Senior Member Join Date: May 2013 Location: San Diego Posts: 112	This is great. I didn't think I would get this great of a response. Awesome! I have taken the cover off and there's been a neighbor and a man at the boat wash station that have taught me a couple of thing. I took out the drew at the bottom of the prop assembly and the magnet has metal clippings. I'm definitely gonna take ur advice on this. BWE is great!! __________________ -Chops