PA 12 Trolling Motor setup - Kayak Fishing Adventures on Big Water’s Edge

RedondoSteve · 04-07-2015, 09:09 AM

Hey All,
Just finished my Watersnake T24 trolling motor project. This should extend my range considerably and save my knees. Its small enough to fit under the seat
so when I get to my spot I'll switch out to the peddle drive and save battery
for return trip. I shortened the shaft about 11" so it sits nice and low. I built a battery tray that fits behind my seat (50 AH AGM). With the battery in place I have to raise the seat to the upper position. I have always used the seat in the low position and hope I don't lessen stability up high. Hope to try it out this weekend. Still going to mount a plug/recept on the front bulkhead for easy power hookup.

cell128 · 04-07-2015, 09:44 AM

Nice! I wonder how fast u can go on that, and how many hours per charge

RedondoSteve · 04-07-2015, 01:20 PM

Hey cell128,
Motor pulls 20 amps at full speed with a 50 Amp Hour battery, should go 2.5 hrs @ full speed. I'm figuring 5 to 6 hrs at trolling speed. A far as actual speed
I dont know? Hopefully find out this weekend. My Dragonfly FF will let me know. Got to get it registered first

unfortunately, going to stop by AAA.

04-07-2015, 09:44 AM	#2
cell128 lizard king Join Date: Mar 2014 Location: Lakewood Posts: 520	Nice! I wonder how fast u can go on that, and how many hours per charge

04-07-2015, 01:20 PM	#3
RedondoSteve Member Join Date: Jul 2014 Location: Redondo Beach Posts: 36	Hey cell128, Motor pulls 20 amps at full speed with a 50 Amp Hour battery, should go 2.5 hrs @ full speed. I'm figuring 5 to 6 hrs at trolling speed. A far as actual speed I dont know? Hopefully find out this weekend. My Dragonfly FF will let me know. Got to get it registered first unfortunately, going to stop by AAA.