Mounting a transducer - HELP! - Kayak Fishing Adventures on Big Water’s Edge

Sloberdog · 12-28-2009, 07:28 PM

Transducers go bad, I know, mine took a dump. I had the same question you did when I first got it and ended up "gooping" it inside the hull. Removing the glued in transducer is a real pain to deal with and have zero intention of doing that again.

I have had the transducer glued/gooped in, held in place by glued in foam that was filled with electrical grease, and currently using the glued in foam method and filling it with 1/2 cup of water before each use (this is what I recommend as I get excellent readings and I can easily remove it).

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

12-28-2009, 07:28 PM	#3
Sloberdog Junior Join Date: Aug 2008 Location: San Diego Posts: 17	Transducers go bad, I know, mine took a dump. I had the same question you did when I first got it and ended up "gooping" it inside the hull. Removing the glued in transducer is a real pain to deal with and have zero intention of doing that again. I have had the transducer glued/gooped in, held in place by glued in foam that was filled with electrical grease, and currently using the glued in foam method and filling it with 1/2 cup of water before each use (this is what I recommend as I get excellent readings and I can easily remove it).