DIY Kayak Cart or buy cheap pre-made on Amazon?

[alanw]

You guys made a cart out of copper tubing rather than PVC? That should work nicely. Just as easy as PVC DIY and probably a lot stronger. Use some 1" heavy wall pipe and fittings and a little solder, steel axle, good to go.

[jorluivil]

Stop wasting your time and get a wheelez cart, you'll thank me later

[jruiz]

What you can do is heat up the axle real good with a heat gun or torch and push it through the hull. The plastic will seal perfectly around the axle. You'll never forget them at home and almost impossible to steal.

[ful-rac]

A do it yourselfer's dream...

[jorluivil]

Originally Posted by jruiz

What you can do is heat up the axle real good with a heat gun or torch and push it through the hull. The plastic will seal perfectly around the axle. You'll never forget them at home and almost impossible to steal.

With something like that you can launch straight out of your truck

[RedSledTeam]

Originally Posted by jorluivil

With something like that you can launch straight out of your truck

...or have down-hill kayak races!!!

[Jacurley45]

Originally Posted by jruiz

What you can do is heat up the axle real good with a heat gun or torch and push it through the hull. The plastic will seal perfectly around the axle. You'll never forget them at home and almost impossible to steal.

That would void the warranty.