Two holes on my hobie kayak! How would you guys recommend to fix this? My wheels for the kayak did t - Kayak Fishing Adventures on Big Water’s Edge

jruiz · 10-17-2015, 04:18 PM

Find pvc with an OD that's the ID of your scuppers. Machine as necessary to get a good fit. Seal the ends. Don't use scupper carts anymore, actually you won't have a choice at this point. That's a really though area to weld inside or out.

jorluivil · 10-17-2015, 04:21 PM

Contact GregAndrew, he's an expert on fixing kayak cracks

Iceman · 10-17-2015, 05:24 PM

Came to see me today. I can't fix these type of cracks. I did offer to file a warranty claim and see what Hobie offers, also suggested the pvc sleeve fix

619-SWIM-DOG · 10-17-2015, 05:29 PM

Somebody say CRACK.....

octico · 10-17-2015, 05:59 PM

Try this ?

https://www.youtube.com/watch?v=gIlobCJSQeo

wwkf · 10-17-2015, 08:44 PM

Try hot glue get few lbs from homedepot heat it up in container till is runny and pour down scupper holes

wwkf · 10-17-2015, 08:50 PM

Had two half inch holes inside the scupper holes at about two inches from the bottom Andy at OEX recommended to try it and it worked

10-17-2015, 04:21 PM	#2
jorluivil Senior Member Join Date: Apr 2010 Posts: 6,856	Contact GregAndrew, he's an expert on fixing kayak cracks __________________ www.facebook.com/Teamsewer

10-17-2015, 05:24 PM	#3
Iceman Administrator Join Date: Mar 2005 Location: 1-2 miles off the point Posts: 6,948	Came to see me today. I can't fix these type of cracks. I did offer to file a warranty claim and see what Hobie offers, also suggested the pvc sleeve fix __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-17-2015, 04:18 PM	#1
jruiz Large Member Join Date: Jul 2012 Location: La Verne, CA Posts: 1,011	Find pvc with an OD that's the ID of your scuppers. Machine as necessary to get a good fit. Seal the ends. Don't use scupper carts anymore, actually you won't have a choice at this point. That's a really though area to weld inside or out.

10-17-2015, 05:29 PM	#4
619-SWIM-DOG Senior Member Join Date: Feb 2013 Location: San Diego Posts: 619	Somebody say CRACK.....

10-17-2015, 05:59 PM	#5
octico Senior Member Join Date: Mar 2014 Location: The city of Orange Posts: 1,278	Try this ? https://www.youtube.com/watch?v=gIlobCJSQeo

10-17-2015, 08:44 PM	#6
wwkf Member Join Date: Mar 2012 Location: Low desert Posts: 54	Try hot glue get few lbs from homedepot heat it up in container till is runny and pour down scupper holes

10-17-2015, 08:50 PM	#7
wwkf Member Join Date: Mar 2012 Location: Low desert Posts: 54	Had two half inch holes inside the scupper holes at about two inches from the bottom Andy at OEX recommended to try it and it worked