Help fixing a rod - Kayak Fishing Adventures on Big Water’s Edge

tomahawk · 03-29-2015, 09:36 PM

what bubblehide said to do will work but you need an adhesive with a really low viscosity. something close to water. you could try heating the epoxy. i would not try 5 minute epoxy because the heat makes it runny but also speeds up the cure. maybe a 5 min with mixing nozzle, preheat both parts, and inject. i have never done this it is pure speculation.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

03-29-2015, 09:36 PM	#4
tomahawk Senior Member Join Date: Aug 2012 Posts: 109	what bubblehide said to do will work but you need an adhesive with a really low viscosity. something close to water. you could try heating the epoxy. i would not try 5 minute epoxy because the heat makes it runny but also speeds up the cure. maybe a 5 min with mixing nozzle, preheat both parts, and inject. i have never done this it is pure speculation.