Wanting to get into this! - Kayak Fishing Adventures on Big Water’s Edge

svendawg · 01-06-2014, 07:42 AM

Quote:

Originally Posted by Bert Vega

I have been going back and forth with the rod and reel stuff. Some say get good stuff and some say wait on it. I going to keep looking around. Going to try to go mid grade. But try to get low level costing for it.

It is pretty cool to see we have a handful of guys here in Temecula area. We should get a meet and greet (beers) setup. With the others in this area. We could all start going fishing together.

If you do get a meet & greet together for the guys & gals in the Temecula area, count me in, I live in Wildomar.
Welcome to the Kayak fishing community

Bert Vega · 01-06-2014, 02:51 PM

Quote:

Originally Posted by svendawg

If you do get a meet & greet together for the guys & gals in the Temecula area, count me in, I live in Wildomar.
Welcome to the Kayak fishing community

We should start another thread for getting the south end of the IE together. I will post up something later. And we can work out time and location.

Bert Vega · 01-08-2014, 02:52 PM

So I get a call today from the shop I bought my yak from. They call and say hobie is not carrying the unit I ordered any longer. That there is a new and improved unit being released. That unit won't be in my hands until mid February. All my other parts are in. Which sucks cause I want to be fishing by then. At least I still have time to get everything else. Also the price of unit is to be going up. And since hobie and them made the mistake. I don't need to pay the difference. So I guess that is my silver lining. All my other parts came in. So I guess I can get those picked up and start installing. I just wanted to mount FF first. Then install everything else around it. I did want to ask if any of you can post a picture of your PA? Looking for some ideas on placement of parts. Also if you have a DIY storage rack or stand for storing in garage. The warden is already crying about the tables.

COLDCUT · 01-08-2014, 06:42 PM

Quote:

Originally Posted by Bert Vega

Also if you have a DIY storage rack or stand for storing in garage. The warden is already crying about the tables.

Bert, I built this DIY PVC stand for when I need to work on the yak. It was cheap and is more than sturdy enough. Best of all, it folds up and tucks neatly away when not in use. As far as permanent storage, I use the Surf To Summit nylon wall hanger. It works well and was a cheap option. The only downside is it's a bear hanging the kayak in the straps by yourself. I'm also not sure how the PA would fit in the straps. Let me know if you need pictures. http://yakfish.isaac-online.com/diy-...c-kayak-stand/

salty pirate · 01-08-2014, 08:12 PM

I built that same stand but used 1.5" and put wheels on it.

What parts do you plan on installing?

kobra · 01-08-2014, 08:26 PM

Hey Bert, not getting your ff right away might not be a bad thing. The best suggestion I have is to check out other rigs. See where and how other ffs are set up to get an idea of where you would like yours. Go fishing and visualize if it might be in the way for your style of fishing. Like if it might get in the way of your rod while fishing, or when netting or gaffing a fish, or entering or exiting your yak. Better to be sure before you mount it than having to move it later.

Bert Vega · 01-09-2014, 08:16 AM

That stand will work perfect. Especially with putting wheels on it. Salty pirate can you post a pic of yours? With the wheel attachment. And thank you for the advise Kobra. Point well taken. I know I want FF as close to me as possible. Going to put it on ram ball so I can push it down if I need too. I see allot of people mounting it on the sail mast. I like it there out of the way. Just concerned on how far away that is. And being able to read the screen. Don't have the best eye site either. As far as parts I am putting on. Installing 2 rocket launchers at the front,Trolly line, rear rod extenders, and FF stuff when that gets in.

01-08-2014, 02:52 PM	#3
Bert Vega Tail Chaser! Join Date: Dec 2013 Location: Murrieta Posts: 627	So I get a call today from the shop I bought my yak from. They call and say hobie is not carrying the unit I ordered any longer. That there is a new and improved unit being released. That unit won't be in my hands until mid February. All my other parts are in. Which sucks cause I want to be fishing by then. At least I still have time to get everything else. Also the price of unit is to be going up. And since hobie and them made the mistake. I don't need to pay the difference. So I guess that is my silver lining. All my other parts came in. So I guess I can get those picked up and start installing. I just wanted to mount FF first. Then install everything else around it. I did want to ask if any of you can post a picture of your PA? Looking for some ideas on placement of parts. Also if you have a DIY storage rack or stand for storing in garage. The warden is already crying about the tables. Last edited by Bert Vega; 01-08-2014 at 03:00 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-08-2014, 08:12 PM	#5
salty pirate Senior Member Join Date: Jan 2011 Location: where the hell is Temecula Posts: 268	I built that same stand but used 1.5" and put wheels on it. What parts do you plan on installing?

01-08-2014, 08:26 PM	#6
kobra Senior Member Join Date: May 2005 Location: oceanside Posts: 880	Hey Bert, not getting your ff right away might not be a bad thing. The best suggestion I have is to check out other rigs. See where and how other ffs are set up to get an idea of where you would like yours. Go fishing and visualize if it might be in the way for your style of fishing. Like if it might get in the way of your rod while fishing, or when netting or gaffing a fish, or entering or exiting your yak. Better to be sure before you mount it than having to move it later.

01-09-2014, 08:16 AM	#7
Bert Vega Tail Chaser! Join Date: Dec 2013 Location: Murrieta Posts: 627	That stand will work perfect. Especially with putting wheels on it. Salty pirate can you post a pic of yours? With the wheel attachment. And thank you for the advise Kobra. Point well taken. I know I want FF as close to me as possible. Going to put it on ram ball so I can push it down if I need too. I see allot of people mounting it on the sail mast. I like it there out of the way. Just concerned on how far away that is. And being able to read the screen. Don't have the best eye site either. As far as parts I am putting on. Installing 2 rocket launchers at the front,Trolly line, rear rod extenders, and FF stuff when that gets in.