![]() |
|
![]() |
#1 |
Junior
Join Date: May 2007
Posts: 10
|
Not sure of your experience with that style reel or casting straight braid. On my Avet MXJ I have braid with a mono topshot. But just in case or for others, the way I learned was by taking a light hookless iron(a weight will work just fine) on an Abu Garcia to the park. I tightened the reel down quite a bit and gave it a light toss. Confirmed what I read in other message boards, the second it hit the ground(simulated water) I got the birds nest of line. I cleared that mess out and tried again. What works best for me is the second before it hits the water is thumb the line/reel to stop the spooling. So after an afternoon of trying that I hit the water. I still get the birds nest of line from time to time but knowing how to prevent it and clean it up as fast as possible has been very useful. I can say from personal experience in other reels knots in braid are no joke! Good luck getting them undone. I learned to tie a double-uni real fast because sometimes it is better to just cut and tie it over again!
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Apr 2010
Posts: 6,856
|
If its not magged go get the magnets or have it magged
__________________
![]() www.facebook.com/Teamsewer Last edited by jorluivil; 06-15-2013 at 05:01 AM. |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|