|
My problem with loading from the back was the fact that once I lifted the front and put it on the Yakima holder, then the kayak would slip back. The rear of the kayak would also be scraping on the concrete and get marked.
No place to grab either. Later I used a tarp or cardboard on the ground, and used the rear strap attached to the back handle to keep the kayak from slipping.
I even have a roller bar with suction cups that supposed to allow for ease of sliding of the kayak once parallel to the roof. After that it was going from side to side and using a step ladder to tie down the kayak and get on the hood to attach the front strap. Then repeat the same for unloading.
With Hullavator once kayak is lifted to waist high, and positioned on the holder, the kayak can be strapped and front and rear (provided) ratcheting straps can be attached. No step ladder necessary.
It seems the hardest part is to lift and lower the kayak waist high while holding the middle handles.
|