Quote:
Originally Posted by bolocop
I feared the same issue so I used a dremel to cut a hole the pattern of the transducer out of the plastic plate. Then you just mount the transducer a little higher so it won’t be damaged during landings.
|
be careful with this approach. I would not recommend it. The plate will loose rigidity if too much material is removed. Also, it could add more turbulence which will add surface noise. Thanks for sharing the post and your experience. I would definitely return it if possible and think about upgrading to next model. That transducer looks weak, which would explain why it was having issues. The head unit is not putting out a lot of power. Looks more oriented for fresh water.