[Old Man in the Sea]

Go to Home Depot and buy 2 > 1/2 " grey PVC electrical sweep 90's from the electrical dept. Make a small cut the looped portion of the net and remove broken plastic and slide the new one sweep 90 on it. Drill 2 holes through the 90
and shaft and cable tie the 90 to the shaft using "thick" cable ties. Use a piece of 65lb spectra to repair the net hole. Now repeat on the other side if you want it to match and start fishing and continue to pass out the halibut fillets as a backlog is forming and guys are starting to gamble outside the stock market now....