what sticks to kayaks?
 

will a polyester fiberglass stick to the plastic most kayaks are made of?
If not ,any suggestions, I'm building a permanent lock boxl for my keys etc.

NOT trying to make a patch!

thanks.:confused:

Have you tried Marine Goop? I use this stuff alot on my Kayak

You could probably find a Pelican type case that has a spot for a padlock. You could bolt or rivet it down and use some goop for a good seal.

Try this stuff 3m dp-8005

3M 5200 (especially slow cure) and also West Systems G-Flex do pretty good.

thanks guys gives me a place to start. Back is healing so lots of time to make a mess of things:D

Not much
 

Marine goop is ok temp sealer but will come off at some point.
5200 n g flex epoxy will work well if rough up surface.
Nvr heard of ne one trying to glass onto yak.

I would recommend fasteners rather than adhesive for you purposes
Some a hole wud b tempted to pry open adhered lock box ruining ur gear

I'd say something like this with the cable wrapped around your scupper;
http://images2.opticsplanet.com/365-...ack-acdbdd.jpg

While on the water, keep it in one of these;
http://www.kayakfishingsupplies.com/catalog/lwdry.jpg
Or you could just keep everything with you...
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
in one of these;
http://3.bp.blogspot.com/_yJQt-NguXX...0/IMG_0525.jpg

I'll tell you what sticks to my kayak. Seagull crap and Squid ink. Gotta just about take the belt sander to those two. :D Anybody tried plastic weld?