|
How to reset temperature on Lowrance 5hds.
Looks like my Temperature on my lowrance 5hds needs to be reset/calibrated. Its always higher by 5 degrees, anyone know how to do this?
|
Do you have it wet mounted or through the hull?
|
Quote:
on the rudder, in the water. |
Comon Frank!!! read the owners manual!
|
Quote:
Thank You Master Fujimoto, i mean Tony the grand Splinter of the teenage mutant ninja turtles. To calibrate Temperature: 1. Select the Temperature Calibration text box from the Installation menu and press enter. The Water Temperature Calibration dialog box will appear. 2. Use the arrow keys to enter the percentage difference between temperature sources. Select OK and press enter. Temperature Averaging Averages temperature by measuring temperature data at a selected interval. Temperature intervals range from one to 30 seconds. If you select five seconds, your temperature will be averaged using measurements taken every five seconds. Water Temp calibration dialog box NOTE: If the temperature sensor is reading a lower temperature than the other temperature source, you will input a positive (+) percentage. Conversely, a negative (–) percentage will be entered if the temperature sensor is reading a higher temperature than the other temperature source. |
| All times are GMT -8. The time now is 12:41 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.